Brass Camlock

Brass camlock coupling, made of 100% virgin materials, have excellent corrosive resistance against water, hydraulic oil, coolants, gasoline and petroleum products.

Detailed Specs

Brass camlock fittings comes into Type A, B, C, D, E, F, DC & DP with sizes ranging from 1/2″ to 8″. They are manufactured according to MIL-C-27487 (A-A-59326).

Brass Camlock adapter type A
Size: 1/2″ to 8″
Thread: NPT/BSPT/BSPP
Manufacture method: gravity casting

Type A camlock adapters are normally used with Type D couplers, while Type B & C couplers as well as Dust Cap (Type DC) of the same size are available.
Aluminum cam and groove adapters are manufactured by A-A-59326 (superseding MIL-C-27487F) or DIN 2828 and comes from 1/2″ to 8″. They are interchangeable with other related products produced by the standard except 5″ and 8″.

Brass Camlock coupler type B
Handle and finger rings: Brass
Fabrication method: gravity casting
Size: 1/2″ to 8″
Thread: NPT, BSP, BSPP

Type B Brass Camlock coupler is normally used with Type F adapter, sometimes Type A & E and DP (Dust Plug) of identical size.
Aluminum cam and groove couplings make the hose connect/disconnect in a snap and eliminate complicated operation of thread and flange.
You just insert the male adapter into the female coupler until contact is made with the gasket. Then press down the arms to produce a uniform gasket compression.

Aluminum cam & groove coupler type C
Handle and rings: stainless stee
Gaskets: PTFE, viton, EPDM, silicone or as required
Working pressure: less than 250psi
Temperature: -150°F to +250°F (-101°C to 121°C)

Type C Brass Camlock fitting couplers are often found cooperating with Type E adapters but also be used with Type A, F as well as DP of the same size.
The biggest feature of quick hose camlock fitting lies in its high efficiency and safety.

Brass Camlock adapter type D
Handles & rings: Brass
Size: 1/2″ to 8″
Standard: MIL-C-27487/ISO A-A-59326

Type D cam & groove couplers are often used with Type A adapters, and sometimes be used with Type E & F and Type DP (Dust Plug) of the same size.
Type D Brass Camlock coupler ranges from 1/2″ to 8″ according to MIL-C-27487/ISO A-A-59326.

Brass Camlock adapter type E
Type E Brass Camlock adapters are often used with Type C, B, D & DC (Dust Cap) of identical size.

Camlock couplings comprises of two parts – adapter and coupler. Insert the adapter into coupler of the same size and put down the cam arms, then sealing is finished.

Brass Camlock adapter type F
Handles rings: available in Brass or brass
Standard thread: NPT, BSPP and BSPT
Gaskets: PTFE, Viton, EPDM or as required

Aluminum Type F adapters are normally used with Type B, C, D or DC couplers with the same size. Brass Camlock Coupling have good abrasion resistance and fair corrosion and chemical resistance.

Brass Camlock dust cap type DC
Handles rings: available in Brass or brass
Gaskets: PTFE, Viton, EPDM or as required

Type DC Brass Camlock couplers are used with type A, E and F adapters to seal the end of the connection.

Brass Camlock adapter type DP
Size: 1/2″ to 8″
Thread: NPT/BSPT/BSPP
Manufacture method: gravity casting

Type DP Aluminum cam & groove male adapter is used to plug into the female coupler such as Type B, C and D couplers.

Excellent Customer Service

Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please contact us. We will reply you within 24 Hours and solve your problems until you’re satisfied.